This high-quality salt and bleach neutralizer is ideal for rinsing bleach-washed surfaces to prevent damage to plants or external surfaces. Agent Halt is best used as a post-wash rinse on plants and windows, to neutralize bleach on roofs with no gutters or bad runoff, or to clean out hoses and equipment.

Causes skin irritation
Causes eye irritation

Pre-rinse surface with water.

Neutralizing 1-2% SH

Pump Sprayer:
4 oz per gallon of water

X-Jet:
8 oz per 5 gallon bucket.*

10:1 Downstream:
15-20 oz per 5 gallon

ProPortioner:
1-2 on dial

Neutralizing 3-4% SH

Pump Sprayer:
8-10 oz per gallon

X-Jet:
16-20 oz per 5 gallon

10:1 Downstreamer:
30-40 oz per 5 gallon

Proportioner:
3-4 on dial


To rinse: Rinse long enough to remove soap trace, then stop. Further rinsing will negate the effects of Agent Halt.

Pro tip: Agent Halt is effective at neutralizing bleach even after it has dried on. Use it after doing a building wash where the solution is sprayed over glass or windows. Rinse the windows with Agent Halt and water mix. Also can be used to rinse any cars affected by overspray, or to clean out any pumps and hoses after bleach use.